Status tab, Configuration tab – Extron Electronics DMP 128 User Guide User Manual
Page 163
status tab
system status Page
The
System
Status
page (see figure 86) provides an overall view of the status of the
device, including system information, power supply status, and serial port settings. The
System
Status
page is the default page when a connection to the device is established.
Access the
System
Status
page from other pages by clicking the Status tab.
Figure 86.
System Status Page
configuration tab
system settings Page
Click the Configuration tab to open the
System
Settings
page (see figure 87).
The screen consists of fields to view and edit IP administration and system settings.
Passwords and Firmware Upgrade pages are accessed by clicking the appropriate
on page 130, for basic information about IP
addresses and subnetting.
Figure 87.
System Settings Page
DMP 128 • HTML Operation
157