Verbose, Mode – Extron Electronics DMP 128 User Guide User Manual
Page 142
command and response table for Basic sis commands (continued)
command
ascii command
(host to device)
response
(device to host)
additional
description
iP setup commands
Set unit name
EX1@
CN
}
Ipn
•
X1@]
View unit name
E
CN
}
X1@]
Set name to factory default
E
•
CN
}
Ipn
•
X4(]
Set time and date
EX1#
CT
}
Ipt
•
X1#]
View time and date
E
CT
}
X1#]
Set GMT offset
EX#
CZ
}
Ipz
X#]
View GMT offset
E
CZ
}
X#]
Set Daylight Savings Time
EX3$
CX
}
Ipx
X3$]
Read Daylight Savings Time
E
CX
}
X3$]
Set IP address
EX1$
CI
}
Ipi
X1$]
Read IP address
E
CI
}
X1$]
Read hardware address
(MAC)
E
CH
}
X1*]
Set subnet mask
EX1(
CS
}
Ips
X1(]
Read subnet mask
E
CS
}
X1(]
Set gateway IP address
EX1$
CG
}
Ipg
X1$]
View gateway IP address
E
CG
}
X1$]
Set DHCP on
E
1DH
}
Idh1
]
Set DHCP off
E
0DH
}
Idh0
]
notE: Changing DHCP from On to Off resets the IP address to the factory default (192.168.254.254).
View DHCP status
E
DH
}
X%]
Set verbose mode
EX2@
CV
}
Vrb
X2@]
View verbose mode
E
CV
}
X2@]
Get connection listing
E
CC
}
[number of connections]
]
notEs:
X#
= Greenwich Mean Time offset
GMT offset value (– 12:00 to 14:00) representing hours and minutes
(HH:MM) local time is offset from GMT time
X%
= On/Off status
0=off/disable
1=on/enable
X1@
= Unit name
Alpha-numeric up to 24 characters. No special characters except hyphen (-)
No upper/lower case distinction, no blanks or spaces, first character must be
alpha, last character cannot be hyphen.
X1#
= Local date/time
Set: MM/DD/YY-HH:MM:SS
Read: day of week, date, month, year HH:MM:SS
(for instance; Fri, 21 Jun
2002
10:54:00
)
X1$
= IP Address
default 192.168.254.254
X1*
= Hardware MAC address
00-05-A6-xx-xx-xx
X1(
= Subnet mask
Default 255.255.0.0
X2@
= Verbose/Response mode
0=clear (default for IP), 1=verbose (default for serial and USB),
2=tagged responses, 3=verbose + tagged responses
X3$
= Daylight Saving time
0=off/ignore;
1= USA (begins second Sunday in March/ends first Sunday in November);
2= Europe (begins last Sunday in March/ends last Sunday in October);
3= Brazil (begins third Sunday in October/ends third Saturday in March).
X4(
= Alpha-numeric unit name
combination of unit name and last three pairs of MAC address
DMP 128 • SIS Programming and Control
136