Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 66)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Programming Guide 60
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional description
IP setup commands (continued)
Set DHCP on or off EX4^ DH } Idh X4^] X4^ : 0 = off, 1 = on. The default setting is 0 (off).
Read DHCP on/off status E DH } X4^]
Set serial port parameters EX4& * X4* , X4( , X5) , X5! CP }
Cpn X4& •Ccp X4* , X4( , X5) , X5!]
Read serial port parameters EX4& CP } X4* , X4( , X5) , X5!]
Set serial port mode EX4& * X5@ CY } Cpn X4& •Cty X5@] X5@ : 0 = RS-232, 1 = RS-422
Read serial port mode EX4& CY } X5@]
Set verbose mode EX5# CV } Vrb X5#]
Read verbose mode E CV } X5#]
Configure current port
timeout E 0* X5$ TC } Pti0* X5$]
View current port timeout E 0TC } X5$]
Configure global IP port
timeout E 1* X5$ TC } Pti1* X5$]
View global IP port timeout E 1TC } X5$]