Connectors (see, Output connectors, Ethernet port – Extron Electronics DXP DVI Pro Setup Guide User Manual

Page 14

Advertising
background image

8

DXP DVI Pro and DXP HDMI Series • Setup

c

Output connectors —

NOTE: The switchers do not alter the video signal in any way.

The signal that is output by the switcher is in the same
format as the input signal.

•

DVI Pro series: Connect DVI output devices to these female
29-pin DVI-I output connectors.

•

HDMI series: Connect HDMI output devices to these female
19-pin type A HDMI output connectors.

d

Ethernet port — If desired, connect the DXP switcher to a
computer, a network WAN or LAN hub, or a control system via
this RJ-45 connector. With the Ethernet connection, you can use a
computer to control the networked switcher with SIS commands,
the Matrix Switchers Control Program, or the embedded HTML
pages on the switcher.
Ethernet connection indicators — The Link and Act LEDs
indicate the status of the Ethernet connection.

•

Link: Indicates that the switcher is properly connected to an
Ethernet LAN. This green LED should light steadily.

•

Act (Activity): Indicates transmission of data on the RJ-45
connector. This yellow LED should flicker as the switcher
communicates.

Ethernet links use Category (CAT) 3, 5e, or 6 unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables, terminated with
RJ-45 connectors. Ethernet cables are limited to 328 feet (100 m).

NOTES:

•

Do not use standard telephone cables. Telephone

cables do not support Ethernet or Fast Ethernet.

•

Do not stretch or bend the cables because this can

cause transmission errors.

A cable that is wired as T568A at one end
and T568B at the other (Tx and Rx pairs
reversed) is a "crossover" cable.

A cable that is wired the same at both ends
is called a "straight-through" cable, because
no pin or pair assignments are swapped.

RJ-45

Connector

Insert Twisted

Pair Wires

1 2 3 4 5 6 7 8

Pins:

Crossover Cable

Straight-through Cable

Pin

1
2
3
4
5
6
7

8

Wire Color

White-green

Green

White-orange

Blue

White-blue

Orange

White-brown

Brown

Wire Color

T568A

T568B

End 1

End 2

End 1

End 2

White-orange

Orange

White-green

Blue

White-blue

Green

White-brown
Brown

Pin

1
2
3
4
5
6
7

8

Wire Color

Blue

White-blue

White-brown

Brown

Wire Color

T568B

T568B

White-orange

White-orange

Orange

Orange

White-green

White-green

Blue
White-blue

Green

Green

White-brown

Brown

Figure 6.

RJ-45 Connector and Pinout Tables

Advertising
This manual is related to the following products: