Extron Electronics DXP DVI Pro Setup Guide User Manual

Page 23

Advertising
background image

17

DXP DVI Pro and DXP HDMI Series • Operation

•

Advanced features consist of:

•

Setting video and audio output mutes

•

Creating I/O groups

•

Setting the RS-232/RS-422 port protocol and baud rate

NOTE: The switcher is shipped from the factory in lock

mode 2.

Selecting lock mode 2 or toggling between lock modes 2

and 0

NOTES:

•

If the switcher is in lock mode 0 or 1, this procedure

selects mode 2.

•

If the switcher is in lock mode 2, this procedure selects

mode 0 (unlocks the switcher).

Toggle the lock on and off by pressing and holding the Enter, Video,
and Audio buttons simultaneously until the following buttons blink
twice (approximately 2 seconds).

•

The Esc, Video, and Audio buttons blink if the DXP is now in lock
mode 2.

•

The Video and Audio buttons blink if the DXP is now in lock
mode 0.

I / O

I / O

AUDIO

VIDEO

ENTER

ENTER

VIDEO

Press and

hold simultaneously.

The buttons blink twice.
Release the buttons.

2 seconds

AUDIO

Figure 16.

Press and Hold the Enter and the Two I/O Buttons

Simultaneously

Selecting lock mode 2 or toggling between modes 2

and 1

NOTES:

•

If the switcher is in lock mode 1, this procedure selects

mode 2.

•

If the switcher is in lock mode 2, this procedure selects

mode 1 (locks all switcher functions except selecting
mode 2).

Advertising
This manual is related to the following products: