Extron Electronics DXP DVI Pro Setup Guide - Manual (Page 29)

23 DXP DVI Pro and DXP HDMI Series • Remote Control
EDID (Extended Display Identification Data)
EDID is a communications protocol or instruction set for the
identification of display devices to computers using the DDC (Display
Data Channel) transmission standard. EDID information consists of
the resolution, refresh rate, and pixel clock information of a display
device.
You can apply an EDID to a selected input by selecting one of the
following categories of EDID files, shown in the
EDID table on the
next page .
• The EDID of the display connected to an output (numbers 1
through the number of outputs on your DXP)
• One of 28 factory-loaded EDID files (numbers 9 through 36)
• One of the four user-defined files, to which you have assigned
your own EDID values (numbers 37 through 40)
NOTES: • Multi-channel audio consists of:
PCM 2-channel audio (stereo) DTS 8-channel audio
AC-3 6-channel audio E-AC-3 8-channel audio
PCM 8-channel audio DTS-HD 8-channel audio
AC-3 8-channel audio MLP 8-channel audio
• 2-channel audio consists of PCM, 2-channel audio (stereo).