Replacing button labels, Selection. see – Extron Electronics DXP HDMI User Guide User Manual
Page 107
DXP DVI Pro and DXP HDMI Series • Matrix Software
101
2.
From the
Systems
pull-down menu, select
DXP
44/88
for the layout that most
resembles all DXP switchers (although you can select any option from this menu).
You can also select
Customize
Button
Layouts
from the
Tools
menu to open the
Customize button layout window, on which you can create your own layout.
3.
Click on the button representation that you want to edit. A red box surrounds the
selected button.
4.
Edit the selected button by using any of the tools provided on the Button Label
Generator window. Some of the edits you can make are:
•
Enter text and select the font, text size, and text color from the drop-down menus
on the tool bar.
•
Select an icon from the
Button
Picture
Palette
and drag it to a button.
•
Place a bitmap image from your computer on a selected button.
To remove all the text or the image from a selected button, click
Clear
Button
. To
remove the text and images from all the buttons, click
Clear
All
Buttons
.
To access the Button Label Generator help, select
Use
Help
from the
Help
menu.
5.
After creating the labels, print them by selecting
from the
File
pull-down menu
in the upper-left corner of the Button Label Generator window. To save the button
label set as an .xml file on your computer, select
Save
As
from the
File
menu and
enter a name for the label file.
Replacing Button Labels
The button assembly consists of a clear lens cap, the button label, and a white diffuser.
Remove the button assembly from the DXP as follows:
1.
Remove the button assembly by inserting a small, flat-bladed screwdriver, such as
an Extron Tweeker, between the button base and the diffuser to gently pry the button
assembly off the button plunger, as shown in figure
102.
2
3
TEXT
Separating the two-
piece button here at
the corner.
Pry the two
pieces apart.
Diffuser
Plunger
Base
Button Label
Clear Lens
Notch
Figure 102.
Replacing a Button Label
2.
Locate the small corner notch on the clear lens cap, and slide the screwdriver
between the lens cap and the diffuser (see
b
in figure
102).