Extron Electronics DXP HDMI User Guide - Manual (Page 124)

DXP DVI Pro and DXP HDMI Series • HTML Operation 118
Control Tab
Use the Control tab to access the Set and View Ties page (click the User Control link)
and the Global Presets page (click the Presets link).
Set and View Ties Page
On the Set and View Ties page, you can create and undo ties, mute and unmute outputs,
and assign EDID values to inputs. To access the Set and View Ties page, select the
Control tab, then click User Control in the left sidebar menu. and View Ties screen
Figure 114. Set and View Ties Page
The Set and View Ties screen consists of the following major sections:
• Set & View Ties — Consists of a matrix of input (rows) and output (columns)
selection buttons.
To create a tie using this screen:
1. Move the mouse over the matrix of input and output selection buttons. Click a
square to create a preliminary tie of the input and output associated with that
button (if they are not already tied) or a preliminary untie (if the input and output
are tied). A “
P ” (for preliminary) appears on the button.
• If you lose track of the input and output associated with a specific button, let
the mouse rest over one of the tie buttons for a moment. A field pops up (as
shown in
figure 115 on the next page) that identifies the input and output for
that button.