Extron Electronics DXP HDMI User Guide - Manual (Page 39)

DXP DVI Pro and DXP HDMI Series • Operation 33
Example 7: Grouping Inputs and Outputs
In the following example, several switcher inputs and outputs are assigned to groups. The
steps show the front panel indications that result from your action.
1. Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button blinks once.
Figure 46. Clear All Selections
2. To enter I/O group mode, press and hold the Input 1 and Output 1 buttons until all
buttons that are not grouped light green (approximately 2 seconds).
1 2 3 4 5 6 7 8
OUTPUTS
1 2 3 4 5 6 7 8
INPUTS
OUTPUTS
INPUTS
1 2 3 4 5 6 7 8
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Press and hold
the Input 1 and
Output 1 buttons.
1 2 3 4 5 6 7 8
Figure 47. Select I/O Group Mode
3. Press and release the Enter button to select group 1.
C O N T R O L
PRESET ESC VIEW
1 3 2 4
Press and release the Enter button to select group 1.
The button lights to indicate the selection.
Group #:
ENTER
Figure 48. Select I/O Group 1