Extron Electronics FOX II T_R DP User Guide - Manual (Page 27)

FOX II DP Transmitter and Receiver • Remote Control 21
Command and Response Table for Transmitter SIS Commands
Command SIS Command
(host to unit)
Response
(unit to host)
Additional description
EDID Minder Resolution
Set the EDID resolution E A X! EDID } EdidA X!] Set the EDID resolution to X! .
Example: E A23EDID } EdidA23 ] Set the EDID resolution to 1280x768 with
embedded 2-channel audio.
View the EDID resolution E AEDID } X!]
Save an EDID E S X@ EDID } EdidS X@] Save the EDID from the X@ connection to the
memory location.
Video and sync mutes
Mute output, video only 1B Vmt1 ] Mute the video output, display black video.
Mute output, video and sync 2B Vmt2 ] Mute the video and sync outputs.
Unmute output 0B Vmt0 ] Output video.
Show video mute status B X#] Video mute status is X# .
Analog audio input gain and attenuation
NOTE: The set gain ( G) and set attenuation (g) commands are case sensitive. The increment level, decrement level, and show level are
not case sensitive.
Set input audio gain to a +dB
value X$ G Aud X%] Set the input level to X% dB (gain).
Example: 2G Aud2 ] Set the input level to +2 dB (gain).
Set input audio attenuation to
a -dB value X^ g Aud X%] Set the input level to X% dB (attenuation).
Increment input level +G Aud X%] Increase the audio level by 1 dB.
Example: +G Aud3 ] Increment the input level from +2 dB to +3 dB.
Decrement input level –G Aud X%] Decrease the audio level by 1 dB.
Show input level G X%]
KEY: X! = EDID resolution See the table below.
X! Value X! Value X! Value X! Value X! Value
Video only (no embedded audio)
01 800x600 05 1280x800 09 1400x1050 13 1680x1050 17 2048x1536
02 1024x768 06 1280x1024 10 1440x900 14 1920x1080 18 2560x1440
03* 1280x720 07 1366x768 11 1600x900 15 1920x1200 19 2560x1600
04 1280x768 08 1366x768 12 1600x1200 16 2048x1080
Video and embedded 2-channel audio
20 800x600 24 1280x800 28 1400x1050 32 1680x1050 36 2048x1536
21 1024x768 25 1280x1024 29 1440x900 33 1920x1080 37 2560x1440
22 1280x720 26 1360x768 30 1600x900 34 1920x1200 38 2560x1600
23 1280x768 27 1366x768 31 1600x1200 35 2048x1080
Connected display or a customer-saved value
X! Source
39 Display connected to the receiver output connector
40 Display connected to the transmitter loop-through connector
41 User memory
* Default
X@ = Save EDID source 1 = Transmitter loop-through 2 = Receiver output
X# = Video and sync mute status 0 = off 2 = video and sync mute on
1 = video mute on
X$ = Audio gain adjustment range 00 to 10
X% = Audio level adjustment range -18 to +10 (in 1.0 dB steps)
X^ = Audio attenuation adjustment range 00 to 18