Extron Electronics HSA 400 & HSA 402 User Guide - Manual (Page 11)

HSA 400/402 Series • Installation HSA 400/402 Series • Installation
Installation, cont’d
2-8
3 . Insert each of the AAP’s screws through the holes in the
AAP opening of the front panel. Secure each AAP to the
panel with the provided captive washers and #4-40 nuts
(figure 2-5).
Cable
#4-40 Nut with Captive
Washer
Front Panel
RGB 580xi SI AAP
HSA 400
125 50/60 Hz 0.5A
COMPUTER
INPUT SELECT
AUDIO
Figure 2-5 — Mounting an AAP device to an HSA 400
US front panel
4 . Replace the front panel in the surface mount enclosure and
secure it in place with the hex head screws removed in
step 2. If you lose a front panel screw, two spare screws
are stored in the underside of the clamshell.
Cabling the Enclosure
HSA 400
120-240 50/60 Hz 5A
H. SHIFT
COMPUTER INPUT
SELECT
AUDIO
RGB 580 xi SI AAP
1A 1B 2 3
Underside View
Front Panel View
1A 1B
Figure 2-6 — HSA 400 enclosure underside features
2-9