Extron Electronics HSA 400 & HSA 402 User Guide - Manual (Page 26)

HSA 400/402 Series • Packaging for Shipment HSA 400/402 Series • Packaging for Shipment
Packaging for Shipment, cont’d
6 . Install the plastic strips that protect the flanged edges of
the top of the surface enclosure (figure B-4).
Figure B-4 — Installing protective strips
7 . Release (tilt up) the top panel.
8 . Insert the HSA and the clamshell into one of the foam
shells (figure B-5). Either open end of the clamshell and
the open top panel will fit into the recesses in the foam.
Figure B-5 — Installing the foam shell
B-5 B-4