Extron Electronics HDXP Plus Series User Guide User Manual
Page 117
HDXP Plus Series Switchers • HTML Configuration and Control
111
Global Presets Page
You can save and recall global presets from the Global Presets page. Access the Global
Presets page by clicking the
Global
Presets
link on the left panel of the Control page.
Figure 107.
Global Presets Page
Saving a preset
Save the current configuration (configuration 0) as a preset as follows:
1.
Click the
Save
Preset
button. It changes to
Select
Preset...
.
2.
Select the desired preset by clicking one of the preset buttons.
•
To create a new preset, click one of the [unassigned] buttons.
•
To overwrite an existing preset, click its button.
3.
Enter a name for the preset in the text field.
NOTES:
•
Preset names are limited to 12 characters. Valid characters are 0 – 9, a – z, A – Z, and
special characters
_ : = / and space.
•
The following characters are invalid or not recommended in preset names:
+ ~ , @ = ‘[
] {
} <
> ' " ; : | \
and
?
.
4.
Click the
Accept
button.
•
If you do not rename an unassigned button, the HDXP names the preset as
Preset nn (nn is the next available number).
•
If you do not rename an existing preset when it is overwritten, the HDXP retains
the same name.
Recalling a preset
To recall a global preset to be the current configuration, click the button for the desired
preset on the Global Presets page.