I/o buttons – Extron Electronics HDXP Plus Series User Guide User Manual

Page 22

Advertising
background image

HDXP Plus Series Switchers • Operation

16

f

View

<

button — The View

<

button has two primary functions (

❏

) and eight

secondary (

•

) functions:

❏

Places the switcher in view-only mode to display the current configuration.

NOTE: View-only mode also provides a way to mute and unmute outputs

(see

Muting and Unmuting Outputs

) on page 33).

❏

Indicates that the HDXP is in view-Only mode.

•

In I/O grouping mode, selects group 3 (see

I/O Grouping

on page 26).

•

In I/O grouping mode, indicates that group 3 is selected (see

I/O Grouping

).

•

Selects the RS-232 or RS-422 protocol and baud rate (see

Selecting the

RS-232 or RS-422 Protocol and Baud Rate

on page 36).

g

Esc

>

button — The Esc

>

button has two primary functions (

❏

) and five

secondary (

•

) functions:

❏

Cancels operations or selections in progress and reset the front panel button

indicators.

NOTE: The Esc

>

button does

not reset the current configuration or any

presets.

❏

Flashes once to indicate that the escape function has been activated.

•

In I/O grouping mode, selects group 4 (see

I/O Grouping

).

•

In I/O grouping mode, indicates that group 4 is selected (see

I/O Grouping

).

•

Selects the RS-232 or RS-422 protocol and baud rate (see

Selecting the

RS-232 or RS-422 Protocol and Baud Rate

).

I/O Buttons

You must select the input-output connection mode when you are creating or viewing a
configuration. This is done with the Matrix (

h

) and Preview (

s

) buttons.

h

Matrix button — The Matrix button has two primary functions (

❏

) and four

secondary functions (

•

):

❏

Places the HDXP in Matrix switching mode, enabling any input to be switched to

any output.

❏

Lights green to indicate that the HDXP is in matrix switching mode, and that any

input can be selected for switching to any output.

•

With the Preview button, toggles the front panel lock on or off (see

Locking the

Front Panel (Executive Mode)

on page 35).

•

With the Preview button, initiates the front panel system reset (see

Resetting

using front panel buttons

on page 38).

•

Selects RS-232 for the rear panel RS232/RS422 port, when the HDXP is in Serial
Port Configuration mode (see

Selecting the RS-232 or RS-422 Protocol and

Baud Rate

on page 36).

•

Flashes to indicate that the Remote RS232/RS422 port is set to the RS-232
protocol when the switcher is in Serial Port Configuration mode (see

Selecting

the RS-232 or RS-422 Protocol and Baud Rate

).

ESC

>

VIEW

<

Advertising