Extron Electronics HDXP Plus Series User Guide - Manual (Page 118)

HDXP Plus Series Switchers • HTML Configuration and Control 112 HDXP Plus Series Switchers • Reference Information 112
Reference
Information
This section provides reference information on the HDXP Plus products. Topics include:
• Mounting the Switcher
• Setting an IP Address
Mounting the Switcher
The HDXP matrix switchers are housed in rack-mountable metal enclosures with
mounting flanges for standard 19-inch racks. If desired, rack mount the HDXP switcher as
follows:
1. Insert the switcher into the rack, aligning the holes in the mounting flanges with those
in the rack.
2. Secure the switcher to the rack using the supplied bolts.
Figure 108 shows a diagram of an HDXP 1616 or 3216 being mounted to a standard
19-inch rack.
Figure 108. Rack Mounting the HDXP