Operation, Front panel operation, Input switching – Extron Electronics MPS 602 Series User Guide User Manual
Page 18
Operation
This section discusses how to connect, configure, and operate the MPS 602. Topics that
are covered include:
•
•
HDMI/DTP Embedded Audio Output
•
•
•
Front Panel Operation
1
2
1
2
3
4
5
6
MPS SERIES
MEDIA PRESENTATION SWITCHER
MUTE
MUTE
MIC
PROGRAM AUDIO
INPUTS
RGB
CONFIG
EXEC
MODE
ab
d
c
e
g
h
i
j k l
f
Figure 12.
Front Panel Details of the MPS 602 Switcher
a
Power Indicator — This LED lights when power is applied.
b
Executive Mode indicator LED — This red LED lights when Executive mode (front
panel lockout) is active.
c
USB Configuration Port — Mini type-B female USB jack for configuration of the
switcher and firmware upgrades.
Input Switching
The controls for the two independent switchers are grouped by input type:
•
Analog RGB inputs (1 and 2) routed to the rear panel RGB output (see figure
on
page 5,
c
).
•
Analog RGB inputs (1 and 2) and digital video inputs (3 through 7) routed to the HDMI
or DTP digital outputs (see figure
on page 5,
e
and
i
).
NOTE: Audio for the the selected input is routed to all audio outputs. When program
audio breakaway is active (see
on page 15), the
input LED corresponding to the breakaway audio blinks while the input LED for the
selected video remains lit solid.
d
RGB Inputs (local monitor output) — Buttons 1 and 2 of the RGB input group select
the input for the RGB output. The LEDs to the right of each button (when lit) indicate the
selected RGB input routed to the RGB output.
e
RGB Inputs (digital output) — Buttons 1 and 2 of the Inputs group select the input
for the HDMI or DTP output and audio switcher section. The LEDs to the right of each
button (when lit) indicate the selected input.
MPS 602 • Operation
12