NXG Technology NX-RM820 - Manual (Page 6)

Turn On Your Entire System
Power on/off your entire system with the MAIN Menu
by following these steps:
1. Touch the MAIN Button to make sure that you are on the
MAIN Menu. It doesn’t matter which page of the
MAIN Menu is displayed.
2.Touch the On or Off button as desired. Wait until all components
are correctly powered on or off. Turning on the system may take
ten to twenty seconds.
3.If one component does not turn on/off, simply touch the
button again.
TIP – The remote control will not respond to a new button push while
it is still issuing commands. While busy, this indicator flashes
at the top of the screen next to the screen title.
NX-RM820
3
NX-RM820_Remote_Manual 10/6/08 2:09 PM Page 6