Select a device only – NXG Technology NX-RM820 User Manual

Page 8

background image

The MAIN Menu activity buttons issue MACROS that reset the
sound and picture of your home theater to a new activity.

TIP– The remote control is still issuing commands

while the

indicator flashes.

If the sound or the picture still are not correct, repeat steps 1 and 2.

Select a DEVICE Only

1. Touch the MAIN button to make sure that you are on the MAIN Menu.

Touch the PAGE button if you don’t see the activity you want.

2. Press and hold the MAIN button. While holding the MAIN button

down, touch the button next to the desired screen label. The remote
control will now display the name of the selected device and all
buttons will operate the device, however, the sound and the
picture of your system have not been changed.



NX-RM820_Remote_Manual 10/6/08 2:09 PM Page 8