NXG Technology NX-RM505 User Manual
Page 18
Advertising
7
Confirm that it is the right code by pressing the Power button. After
you have confirmed that the right code is entered, save the code by
pressing the SAVE button on the LCD.
8
Confirm that you entered the right code number that matches your
component by pressing other functional buttons. If any of the
buttons do not operate, as they should, please repeat from Step 1.
9
Continue to program other components by repeating from step 1
above.
10
You can press EXIT at any time if you do not wish to proceed.
11
Exit from Pre-programmed mode by pressing the MAIN button and
then exit from the SETUP mode by pressing the MAIN button once
again.
NX-RM505
18
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 18
Advertising