NXG Technology NX-RM505 - Manual (Page 9)

3. Summary of Operations
…MUTE) while all the other buttons control other equipment. You
can also set up the remote to operate channel control and transport
functions (PLAY, STOP, REWIND, FAST FORWARD, SKIP-, SKIP+,
PAUSE and RECORD buttons) from VCR, DVD, DVR, LD, CD or any
other mode while all other buttons in the remote control are con-
trolling other components. Please refer to page 32 in the manual for
details.
G. Editing LCD Text
You can write your own text on each of the twenty-six LCD screens.
Please refer to page 39 in the manual for details.
H. Cloning The NX-RM505
The NX-RM505 is capable of sending all the programmed codes
and operations from one NX-RM505 to another NX-RM505. Please
refer to page 43 in the manual for details.
I. All Other Operations
You can set the duration of the backlight on time and change the
LCD screen contrast. Please refer to pages 42and 44 in the manual
for additional details.
Note: The last Device selected will remain active when you are on
the MAIN page and will be shown at the bottom of the LCD screen.
For example, if you are using ‘TV’ and then return to the MAIN
page, the hard buttons remain in TV mode. The LCD buttons only
change when you select another device.
NX-RM505
9
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 9