NXG Technology NX-RM505 - Manual (Page 25)

5. Programming Favorite Channels
Tip: If you press a wrong channel number, move the cursor
by using the left or right button of the joystick and then
reassign the correct channel number.
6 Return to Step #3 until you have programmed all of the FAV channel
buttons that you require.
7 Once you have completed the programming and wish to exit from
the Favorite Channel mode, press the MAIN button. Exit from the
SETUP mode by pressing the MAIN button once again.
Tip: There are five pages of LCD screens for favorite channel
programming. You move to other pages by pressing the
PAGE or FAV button.
Tip: You can use the following buttons: 0-9, ENTER, DIS-
PLAY, POWER, SYSTEM OFF and INFO/PAUSE in your FAV
macro.
Tip: (For Advanced Users) To make even more powerful FAV
macros, you can learn codes from your original remote(s) to
the 0-9, ENTER, DISPLAY, POWER, SYSTEM OFF and
INFO/PAUSE buttons in any device and use them in your FAV
macros. (This will not work if you have already applied a pre-
programmed device code to those buttons.)
For example: Some televisions require you to send out a
code after the digits other than the ENTER code in order to
change channels. For this, you could LEARN the proper code
to the ENTER button from your original television remote and
use that in your FAV macro. If you are creative, you can learn
any codes to these buttons and make your FAV macros do
almost anything!
NX-RM505
25
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 25