IMP Pumps GHN(M)(D)basic(auto) & SANbasic 40-100 flanges - Manual (Page 12)

-12-
GB
1. General information
1.1 Intended use
GHN, GHND models of IMP-pumps are intended for transporting the media in heating,
cooling, conditioning and ventilating systems.
1. 2 Product information
1. 2.1 Rating plate
1.2.2 Technical data
- protection type IP 44
- insulation class 200
- the motor is protected with series-produced klickson
- sound pressure level <70 dB(A)
- media temperature -10°C to +120°C.
- ambient temperature max. 40°C
- max. allowable pressure in the system can be1 MPa (10 bar).
1.2.3 Media types:
- heating water according to VDI 2035
- mixture of water and glycol, with up to 50% of glycol content. In case of a mixture containing
glycol the information on pumping is to be corrected with regard to higher viscosity. Use
only glycol, protected against corrosion and follow the manufacturer‘s instructions.
- To use the other media IMP PUMPS‘s approval is required.
- While ordering spare parts please provide all information indicated on the rating plates.
2. S
afety
Important: Read the operational and safety instructions before installation and start up!
2.1 Identification of hints in the operating instructions
- General danger
- Danger - High voltage