Alpha Technologies CXDS-M 600_600-19 - Manual (Page 19)

17
9400002-J0 Rev A
Call Alpha Technologies if you have any questions before you proceed: 1-888-462-7487
Verify that you have all the necessary parts per your order for proper assembly.
3.3 Unpacking the Equipment
Packaging assemblies and methods are tested to International Safe Transit Association standards.
Check For Damage
Prior to unpacking the BDFB, perform a visual inspection and note any damage. Unpack the equipment and
inspect the exterior for damage. If any damage is observed contact the carrier immediately.
Continue the inspection for any internal damage. In the unlikely event of internal damage, please inform the car-
rier and contact Alpha Technologies for advice on the consequence of any damage.
General Receipt of Shipment
Consult the packing slip and power plant bill of materials to verify that you have the correct number of BDFBs per
your order.
The inventory included with your shipment is dependant upon the options you have ordered. The options are
clearly marked on the labels on the shipping containers.
Miscellaneous Small Parts
Review the packing slip and bill of material to determine the part numbers of the “configuration kits” included with
your BDFB. Review the bill of materials for each configuration kits to verify all the small parts are included.