Alpha Technologies CXDS-M 600_600-19 User Manual
Page 29
Advertising
27
9400002-J0 Rev A
Cut between the holes
with side cutters to make a
large enough entryway for
the required cables. Figure
17 shows a small hole cut
in the cover.
Make a straight cut to the
back edge of the cover,
so the cover can be fitted
around the cables when
replacing it at the end of the
installation.
Reinstall the top cover.
5.5.1 Top Cover(s)
Figure 17 — Top Kydex cover with cuts for cable entry
Advertising
This manual is related to the following products: