Cxcm2 specifications, Basic unit, cxcm2, Environmental – Alpha Technologies CXPS 48-1.8-M2, 48V Pos Gnd User Manual

Page 9

Advertising
background image

Specifications for Argus’ CXCM2 Cordex Controller Modular 2RU Model

Argus Technologies Ltd.

018-588-B1 Rev B WC

Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved.

Page 1 of 2

Basic Unit, CXCM2

Input Voltage:

17 to 65Vdc within rated limits


Current:

<100mA @ 48Vdc
<200mA @ 24Vdc


MTBF:

>430,000 hours @ 30°C (86°F)


EMC:

The unit meets requirements of:
ICES-003 Class B
EN 55022 Class B (CISPR 22)
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT /Burst
EN 61000-4-6 Conducted Immunity
FCC Part 15 Class B, FCC Part 68



In accordance with FCC requirements, we provide the following statement as specified in the FCC guidelines for
conformance to Part 15, Class B:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.


Any changes or modifications to this equipment not expressly described in this manual could void the FCC
compliance.

Environmental

Temperature:

-40 to 65°C standard @ 3000m, derate to 55°C @ 4000m
(-40 to 149°F, derate to 131°F @ 13124ft)


Humidity:

0 to 95% non-condensing


Elevation:

-500 to +4000m
(-1640 to 13124 ft)


Advertising