Alpha Technologies CXPS-HD 48-1.2-225 - Manual (Page 17)

0530082-J0 Rev B Page 9 of 31
3 Inspection
3.1 Packing materials
All Alpha products are shipped in rugged, double-walled boxes and are suspended via solid inserts to minimize
shock that may occur during transportation. Packaging assemblies and methods are tested to International Safe
Transit Association standards. Power systems are custom packaged in heavy-duty plywood crates.
Products are also packaged with a plastic wrap that contains a corrosive-inhibitor that protects the product from
corrosion for up to two years.
Rectifiers and batteries are shipped on individual pallets and are packaged according to the manufacturer’s
guidelines.
3.1.1 Returns for service
Save the original shipping container. If the product needs to be returned for service, pack the unit in its original
shipping container. If the original container is unavailable, make sure that the product is packed with at least three
inches of shock-absorbing material to prevent shipping damage.
Alpha Technologies is not responsible for damage caused by the improper packaging of returned products.
3.2 Check for damage
Before unpacking the product, note any damage to the shipping container. Unpack the product and then inspect
the exterior for damage. Contact the carrier immediately if you see any damage.
Continue the inspection by checking for internal damage. In the unlikely event of internal damage, inform the
carrier and contact Alpha Technologies for advice on the impact of any damage.
3.3 General receipt of shipment
3.3.1 Racks
Consult the packing slip to verify that you have the correct number of racks that you ordered.
3.3.2 Rectifiers (purchased separately)
Consult the packing slip to verify that you have the correct number of rectifiers that you ordered.
3.3.3 Miscellaneous small parts
Review the packing slip to determine the part number of the “configuration kits” included with your system.
3.3.4 Batteries (purchased separately)
Refer to the packing list to verify that you have the correct number of batteries.
Verify that you have all the necessary parts for proper assembly.
Call Alpha Technologies if you have any questions before you proceed: 1-888-462-7487.