Alpha Technologies AlphaGen DCX2000 - Operator's Manual - Manual (Page 24)

24 041-135-B0-001 Rev. A (07/2013)
Fig. 3-5, Accessing the Spark Arrestor
Spark Arrestor
M6 Screws
Muffler Grill
M4 Screws
3.0 Servicing, continued
3.6 Spark Arrestor Maintenance
If the generator has been running, the muffler will be very hot. Allow it to cool before proceeding.
CAUTION!
The spark arrestor must be serviced every 100 hours to maintain its efficiency.
NOTE:
Tools Required:
#2 Philips Head Screwdriver
Procedure:
1. Remove the four M6 screws and remove the muffler grill.
2. Remove the two M4 screws holding the spark arrestor to the muffler.
3. Use a stiff wire brush to remove carbon deposits from the spark arrestor screen.
4. Inspect the screen for holes, and replace it if necessary.
5. Reinstall the spark arrestor.
6. Reinstall the muffler grill.