Alpha Technologies PWE-6FT User Manual
Page 21
21
031-259-B0-001, Rev A
Fig. 2-5, PWE-6FT Enclosure Mounted to Pedestal
Enclosure footprint
2.0
Installation, continued
2.3.3 Installing Enclosure on the Pedestal
Never transport or move the pedstal or enclosure with batteries installed. Batteries must ONLY
be installed after pedestal/enclosure installation. Transporting with batteries installed may
cause injury to installer and/or damage to enclosure and installed equipment.
Before bolting the PWE-6FT enclosure to the top of the pedestal:
1.
Locate and remove the four knockouts located at the bottom of the PWE-6FT
enclosure.
2.
Place the empty enclosure on top of the pedestal and align the knockouts with the
bolt holes on the top of the pedestal.
3.
Insert the four (included) 1/4” stainless steel bolts and washers and tighten.