Up to 110 mhz (4-terminal pair), Port/cable extension – Atec Agilent-16047A User Manual
Page 33
28
Up to 110 MHz (4-Terminal Pair)
Port/Cable Extension
16048G Test Leads
Terminal Connector: 4-Terminal Pair, BNC
Cable Length (approx.): 1 m
Cable Tip: BNC (female)
Weight (approx.): 460 g
Additional Error: For detailed information,
refer to the operation manual or the specifications
of 4294A.
Description: The test leads extend the measurement
port with a 4-Terminal Pair configuration. It is provided
with a BNC male connector board to allow the attachment
of user-fabricated test fixtures.
Applicable Instrument: 4294A
Frequency: DC to 110 MHz
Maximum Voltage: ±42 V peak max (AC+DC)
Operating Temperature: -20°C to 150°C
Furnished Accessories:
Options:
16048G-001: Add BNC Bracket* (P/N 16048-60003)
* Here the BNC Bracket refers to the terminal board with
four BNC (m) connectors.
Compensation and Measurement: Adapter setup is
recommended before measurement. In the adapter setup
menu, select 4TP 1M. Then use the 100
Ω
resistor fur-
nished with the 4294A to perform phase compensation
and load data measurement.
Description
P/N
Qty.
Mounting Plate
NA
1
Operation and Service Manual
16048-90050
1
16048H Test Leads
Terminal Connector: 4-Terminal Pair, BNC
Cable Length (approx.): 2 m
Cable Tip: BNC (female)
Weight (approx.): 690 g
Additional Error: For detailed information,
refer to the operation manual or the specifications
of 4294A.
Description: The test leads extend the measurement
port with a 4-Terminal Pair configuration. It is provided
with a BNC male connector board to allow the attachment
of user-fabricated test fixtures.
Applicable Instrument: 4294A
Frequency: DC to 110 MHz
Maximum Voltage: ±42 V peak max (AC+DC)
Operating Temperature: -20°C to 150°C
Furnished Accessories:
Options:
16048H-001: Add BNC Bracket* (P/N 16048-60003)
* Here the BNC Bracket refers to the terminal board with
four BNC (m) connectors.
Compensation and Measurement: Adapter setup is
recommended before measurement. In the adapter setup
menu, select 4TP 2M. Then use the 100
Ω
resistor fur-
nished with the 4294A to perform phase compensation
and load data measurement.
Description
P/N
Qty.
Mounting Plate
NA
1
Operation and Service Manual
16048-90050
1
Test fixture overview