Atec Agilent-16047A - Manual (Page 86)

81
1 kHz (Milliohm) Various Components
16143B Mating Cable
Terminal Connector: 4-Terminal, BNC
Cable Length (approx.): 60 cm
Weight (approx.): 220 g
Description: The 16143B is designed to operate specifi-
cally with the 4338B. It is used to connect any combina-
tion of two test lead types to the 4338B.
Applicable Test Leads: 16005B, 16005C/D, 16006A,
16007A/B
16005B Kelvin Clip Leads
DUT Connection: 4-Terminal
Cable Length (approx.): 40 cm
Weight (approx.): 40 g
Description: The 16005B is useful when measuring test
devices that have large terminals. It incorporates the
Four-Terminal (Kelvin) connection method for accurate
low resistance measurements. The jaws of the 16005B
are a set of electrically independent contacts. The current
terminal feeds the test current to the DUT while the volt-
age terminal detects the voltage across the DUT.
Furthermore, the contact design assures accurate mea-
surement down to the lowest resistance range.
DUT Size: See figure below
16005C/D Kelvin IC Clip Leads
DUT Connection: 4-Terminal
Cable Length (approx.): 40 cm
Weight (approx.): 20 g
Description: The 16005C/D is useful when measuring
test devices that have thin leads. It incorporates the Four-
Terminal (Kelvin) connection method for accurate low
resistance measurements. The jaws of the 16005C/D are
a set of electrically independent contacts. The current
terminal feeds the test current to the DUT while the volt-
age terminal detects the voltage across the DUT.
Furthermore, the contact design assures accurate mea-
surement down to the lowest resistance range.
DUT Size: See figure below
16005C (black clip)
16005D (red clip)
DUT Dimensions