Atec Agilent-E8364B - Manual (Page 10)

6
the analyzer can have predefined frequency segments which will output a higher power level when the extended dynamic range is required
(i.e. devices with high insertion loss), and reduced power when receiver damage may occur (i.e. devices with low insertion loss). The
extended range is only available in one-path transmission measurements.
d Typical performance.
e May be limited to 100 dB at particular frequencies below 500 MHz due to spurious receiver residuals. Methods are available to regain the
full dynamic range.
f E8362B/C only: Option H11 decreases value by 1 dB.
g E8362B/C only: Option H11 decreases value by 2 dB.