Atec Fluke-OF-500 - Manual (Page 21)

Safety Information
11
• Read the instructions for splice machines before
using the OTDR to monitor splicing procedures.
The OTDR can interfere with the light injection
detection techniques used by some splicers.
• To avoid unreliable test results, connect the ac
adapter or replace the battery as soon as the
low battery indication appears.
•
You may use a PC to move or copy test record
(.tst) files from a memory card, but do not
rename the .tst files. Doing so may result in loss
of data.
•
Never remove the memory card while the
memory card’s LED is on. Doing so can corrupt
the data on the card.