B&K Precision 1747 - Manual - Manual (Page 22)

20
6. STAT?<CR>
The power supply responds to this command with one of the following
messages:
CV<CR> if the power supply is in Constant Voltage mode
CC<CR> if the power supply is in Constant Current mode
7. OUT ON<CR>
Turn on the output.
8. OUT OFF<CR>
Turn off the output.
9. IDN?<CR>
The power supply responds to this command with the following message:
B+K PRECISION 1747 Revision x.x<CR>
5.3 Application Software
Remotely control your 1747 using B&K Precision’s application software, available for
download at
www.bkprecision.com . This software provides a virtual front panel and
a simple data logging function to store and log data to a text or CSV file. RS232
commands can also be sent through the software.