B&K Precision 1739 - Manual - Manual (Page 10)

8
CURRENT CONTROL
7) Current Coarse Control. Adjusts current limit in constant voltage mode. Adjusts
constant current value in constant current mode. Current can be read from the
red LED display.
8) Current Fine Control. Adjusts current limit in constant voltage mode. Adjusts
constant current value in constant current mode. Current can be read from the
red LED display.
POWER CONTROLS
9) Power ON-OFF Switch.
OUTPUT TERMINALS & CONTROL
10) “-” Terminal (Black). Negative polarity output terminal.
11) GND Terminal. Earth and chassis ground.
12) “+” Terminal (Red). Positive polarity output terminal.
13) Output On/Off button. Turns output power on or off without powering down the
entire instrument.
3.2 Rear Panel
Figure 2 - Rear Panel
13) Power Cord
14) Fuse
15) RS-232 Interface Connector
15
14
13