B&K Precision 5492BGPIB - Manual - Manual (Page 73)

SCPI Command Reference
73
Query:
:MBFactor? Q uery “b” factor
Return String:
The value of b in <NRf> format
Description:
T his command is used to define the “b” factor for the mx+b calculation.
:PERCent <NRf>
Command syntax:
:CALCulate[1]:KMATh:PERCent <NRf>
Command Parameter:
<NRf> = -1e6 to1e6 Specify target value.
Query:
:PERCent? Query percent target value
Description:
This command is used to specify the target value for the percent calculation.
:ACQuire
Command syntax:
: CALCulate[1]:KMATh:PERCent:ACQuire
Description:
This action command is used to acquire the current reading and use it as the target value for the
PERCent calculation.
:STATe <b>
Command syntax:
:CALCulate[1]:STATe <b>
Command Parameter:
<b> = 0 or OFF Disable CALC1 calculation.
1 or ON Enable CALC1 calculation.
Query:
:STATe? Query state (ON or OFF) of CALC1.
Return String:
1 or 0