Dialight AR111-LV-AA-BB LED Lighting Module User Manual

Led lighting modules, Important

Advertising
background image

LED Lighting Modules

PWAR-C1-AA-BB & PWARD-C1-AA-BB

AR111-AA-BB & AR111-LV-AA-BB

! PLEASE READ THESE INSTRUCTIONS CAREFULLY

BEFORE INSTALLATION !

Installation should be carried out in accordance with the I.E.E Wiring

Regulations (BS7671) or in accordance with standard codes of practice

in the country of use. If in doubt, consult a qualified electrician.

! IMPORTANT !

Power MUST always be switched off when disconnecting

and re-connecting LEDs.

! PLEASE KEEP THIS GUIDE

FOR REFERENCE !

Instruction Manual

CONNECTING PWAR & AR111 MODULES

CONNECTING PWARD & AR111-LV MODULES

The PWAR modules are designed to operate with a constant current

supply up to 700mA maximum.

Connect the modules to the constant current supply in SERIES, see

schematic below.

The PWARD modules are designed to operate with a DC supply from

12-24VDC or an AC supply from 11-16VAC.

Connect the modules to the power supply output in PARALLEL, see

schematic below.


PWAR & AR111 Connection Notes:-

The constant current LED driver should be capable of providing typically 31.5
VDC for 350mA operation and 33.0 VDC for 700mA operation.


PWARD & AR111-LV Connection Notes:-

The supply should be rated for the following (for each module used):-

12 VDC - 0.92 Amps running with a 1.2Amps for initial switch-on
24 VDC - 0.48 Amps running with a 1.2Amps for initial switch-on

12 VAC - 1.2Amps (RMS)

Compatible Dialight Lumidrives Constant Current Drivers:-












Check with Dialight website for updates on LED drivers

Compatible Dialight Lumidrives Constant Voltage AC/DC Drivers:-

Driver

350mA

700mA

NO. OF UNITS

MDU 9 (MDU9-SC-35-70)

1

MINIDIM 70 (MND70)

1

36W 700mA IP65 Driver
(MCDU36-700-P)

1

(+) Positive Connection

(-) Negative Connection

Thermistor Connections

Ground

Cable Strain Relief

(+) Positive Connection

(-) Negative Connection

Dimming Connection

Ground

Cable Strain Relief

CONSTANT CURRENT

SOURCE OUTPUT

NEGATIVE OUT to

POSITIVE IN

NEGATIVE OUT

to PSU RETURN

AC/DC

POWER OUTPUT

Driver

12V

24V

NO. OF UNITS

MULTIDRIVER (MLD8-C-35-70)

1

MVDU100-12-P

N/A

1— 8

MVDU100-24-P

N/A

1— 5

AA = LED COLOUR

BB = OPTICS

Dialight Europe Ltd
Exning Road - Newmarket - Suffolk - CB8 0AX-UK
Tel: +44 (0) 1638 665161 - Fax: +44 (0)1638 660718 - www.dialight.com

Dialight Corparation

1501 Route 34 South - Farmingdale - NJ 08087 - USA

Tele: 1-732-919-3119 - Fax: 1-732-751-5778 - www.dialight.com

A55-PWAR-INST-ISSUE01

Advertising