Dialight SafeSite L-864 Red LED Class I, Div 2 Medium Intensity Beacon - Manual (Page 3)

Document No.
9100-127-1438-99 Rev A
March 31, 2011
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
3 of 13
Section 1: Overview
The Dialight Flashing Red Beacon is designed for the lighting of flare stacks,
chimneys, offshore oil platforms and other obstructions to aerial navigation, as
specified by the FAA, FCC, ICAO and Transport Canada.
The L-864 Flashing Red Beacon as shown in Figure 1, (hereafter referred to as
the Beacon) operates from 120 / 240VAC 50/60 Hz. The beacon consists of 36
High Performance LEDs that provide the light output equivalent to an
incandescent fixture while consuming a fraction of the electrical power. This
manual provides guidance and recommendations for the installation and testing
of the beacon assembly. Please read this document in its entirety before
installing the Beacon.
Figure 1
L-864 Flashing Red Beacon Assembly