Castle TSM-21 Serial 61076 to 64233 (Parker) Operator Manual - Manual (Page 13)

Initial Configuration
Now that the machine is connected to a power source and air supply, it is suggested that you test
the machine’s controls for proper function.
Read the Operator Manual carefully before operating. Make sure that you have followed
all assembly and installation instructions correctly. Make sure that you are familiar with
the functions described in the rest of the manual as well. Failure to follow this warning
may result in serious injuries to persons and property.
ƒ Turn on the Power Switch.
ƒ Place a piece of scrap wood under the Clamp Guard against the Face Plate to depress the
Safety Buttons (Figure 5).
Figure 5
ƒ Be sure to keep your hands clear of the clamp, then step on the Foot Pedal. A full cycle
should take 1½ to 2 seconds.
11