Castle TSM-21 Serial 61076 to 64233 (Parker) Operator Manual User Manual
Page 9
7
• Keep all body parts away from the moving parts of this machine whether it is in operation
or at rest.
• Do not place hands or fingers between the work piece and the clamp or near the cutters at
any time. Always use a securing device when undertaking close work.
• Do not wear gloves or loose clothing (such as sweaters, jackets, or jewelry) when
operating or standing near an operating machine.
• Keep two hands on the work piece when initiating a pocket cycle on this machine.
• Before attempting adjustments, maintenance, or repair, TURN OFF this machine,
disconnect it from its power source and air supply. Wait for all motion to stop. Failure to
disconnect this machine from its power source and air supply or wait for all motion to
stop could result in electrocution or injury.
• Always keep the area around this machine clean and uncluttered. Poor housekeeping
could result in slips, falls, or other injuries.
• Concentrate at all times. Failure to pay attention to the task at hand is the cause of most
accidents.