CEMB USA C206 User Manual - Manual (Page 5)

I 0677 - 5
3
GB
3 - START- UP
3.1 - ELECTRICAL CONNECTION ►
The machine is supplied with an AC power supply and power cable with 12-24 VDC battery. The supply voltage is
given on the machine nameplate. It cannot be changed.
Connection to mains should always be made by expert personnel.
3.2 - ADAPTER MOUNTING ►
The wheel balancer is supplied complete with cone ►
type adapter for fastening wheels with central bore.
The threaded terminal is fi tted according to the dra-
wing; it can be removed to fi t optional adapters.
3.3 - WHEEL MOUNTING ►
The wheels should be fastened with one of the numerous adapters available.
Incorrect centering inevitably causes unbalance.