CEMB USA C72_2 (A) - Manual (Page 15)

I 0459 - 15
14
15
GB
Example of display prior to SPLIT function
- Place the wheel in the outside unbalance correction
position.
- Set one of the top spokes (preferably the one to the left
of the unbalance) to 12 o’clock.
- Press the button
- Follow the UP/DOWN indication of the positioning
LEDs and set the second top spoke to 12 o’clock.
- Press button .
5.5 - Recalculation of the unbalance
Press after new setting of the measurement value again.
5.6 - Split function (hidden weight)
The SPLIT function is used to position the adhesive weights behind the wheel spokes so that they are not visible. This
function should be used only in the case of static unbalance or where the hidden adhesive weight is to be applied on the
outside. Input the wheel dimensions and do a spin.
Start the SPLIT function as follows: