CEMB USA C71 (B) - Manual (Page 15)

I 0378 - 14 I 0378 - 15 GB GB
6.4 - Display saver
It is possible to enable a screen saver function which temporarily replaces the data displayed with moving symbols.
This function acts when the balancing system is not used for the time period defi ned in the relative set-up:
Modify time expressed in minutes.
CONFIRM
If the value is set to 0, the display saver is automatically
disenabled. The display saver is not active in the balancing
machine set-up menu.To return to normal balancing machine
function, simply press any button or move the wheel.
6.5 - Automatic gauges calibration
6.5.1 - Rim distance gauge
- Shift the distance gauge to position
0
, keeping it quite still,
press
- Move the gauge to position
15
, press
CORRECT CALIBRATION
- Return the gauge to rest position.
- The wheel balancer is ready for operation.
N.B.: In the event of errors or faulty operation, the writing "P.O.”
ap pears on the display : shift the gauge to position
0
and repeat
the calibration operation exactly as described above. If the
error persists, contact the Technical Service Department. In the
event of incorrect input in the rim distance gauge calibration
function, press STOP to cancel it.