CEMB USA C71_2 (B) - Manual (Page 11)

MENU
START
START
STOP
I 0539 - 11 GB
5.7 - Unbalance optimisation
- This function serves to reduce the amount of weight to be added in order to balance the wheel
- It is suitable for static unbalance greater than 30 g.
- It improves the residual eccentricity of the tyre.
- With a piece of chalk make a reference mark on the flange and the rim
- With the aid of a tyre remover, turn the tyre on the rim by 180°
- Refit the wheel in such a way that the reference marks on the rim and
the flange coincide.
- RH display: percentage reduction value
- LH display: actual static unbalance value which can be reduced by
rotation
RIM IN POSITION INDICATION
- Mark the tyre (12 o’clock position)
TYRE IN POSITION INDICATION
- Mark the rim (12 o’clock position)
Turn the tyre on the rim until the marks correspond to obtain the
optimization shown on the display.
CANCEL OPTIMISATION IN ANY PHASE.
Unbalance already measured
No previous
unbalance
measurement
unbalance measurement