CEMB USA C71_2 (B) User Manual
Page 8
![background image](/manuals/326215/8/background.png)
6
I 0539 -
8
GB
5.2.1.1 - Static & combined modes
After calibration as per
STEEL OR ALUMINUM WHEEL RIMS. SPRUNG COUNTERWEIGHTS
, it is possible to modify the
position of the correction weights using the
ALU
buttons.
STATIC: Select by pressing ALU (5E)
Balancing of light alloy rims with application of adhesive weights
on the shoulders of the rims.
Combined balancing: adhesive weight on the outside and clip-on
weight on the inside.
Combined balancing: adhesive weight on the inside and clip-on
weight on the outside.
5.2.2 - Rims with internal counterweight
Slide out the gauge on the LH side, at the point where a weight is
to be fitted. Wait for the “beep”. Slide it out further towards the RH
side and wait for a second “beep”. The wheel balancer
automatically identifies ALUS mode.
Counterweight position automatically suggested
.
ALU
(5I) can be used to set the alternative position indicated.