CEMB USA C71_2 (B) User Manual
Page 13
Advertising
![background image](/manuals/326215/13/background.png)
d
b
a
9
10
I 0539 -
13
GB
6.3 - Manual dimension presetting (Use only in particular cases or for test)
6.3.1 - Steel wheel rims (use for setting dimensions
in
AUTOCALIBRATION
)
- Setting:
Press
or
Set with
the rated width that, in general, is shown on
the rim, or measure width “b” with the calliper gauge supplied.
- Press the button for more than 2 seconds
- Preset using
the nominal diameter “d” indicated on the
tyre
- Press the button for more than 2 seconds
- Preset using
distance “a” for the inside of the wheel
from the machine.
N.B.: This setting is also valid for the correction modes
indicated at “STATIC & COMBINED MODES”
6.3.2 - ALUS rims
0 gauge
Advertising