Acer Altos G610 - Manual (Page 121)

111
Remote Console
Phone No. This parameter allows you to set the phone
number of the RDM manager station that
the RDM module must dial once RDM is
activated and the Remote Console is
enabled. To set, simply highlight the
parameter and enter the Remote Console
phone number.
If the remote console phone number is
using an (X) line, then you must enter six
commas (,) after the phone number and
before the extension number, if any.
When entering the extension number, we
recommend that you insert a comma after
each number. The commas specify delay.
If this parameter is left blank, the Remote
Console calling function is disregarded.
User input
Dial Out Retry
Times This parameter lets you specify the
maximum number of times the RDM server
must retry to connect to the RDM manager
station once the server fails and RDM is
activated. If the server has completed the
specified number of tries and the
connection still fails, the server bypasses
RDM and goes into normal mode. 2
4
8
Infinite
Emergency Management
RDM Work
Mode When detecting system failure, the RDM
module will take some actions according to
the enabled mode.
Waiting: Page and wait for the RDM
station to call in
Reboot: Page, then reboot
Disabled: No action
Note: If Waiting is selected, a password
consisting of at least three alphanumeric
characters must be set.
Disabled
Waiting
Reboot
Waiting Mode
Password Prevents unauthorized access to the server User input
Parameter Description Option
AA G610.book Page 111 Monday, October 22, 2001 9:46 AM