Installing expansion cards – Acer Altos G610 User Manual
Page 85
Advertising
75
Installing expansion cards
The onboard expansion slots supports PCI (Peripheral Component
Interconnect) cards.
To install an expansion card:
1
Remove the housing panels. Refer to page 51 for more detailed
instructions.
2
Locate an empty expansion slot on the mainboard.
3
Remove the metal bracket opposite the selected empty expansion
slot by removing the screw that holds the bracket to the housing
then pulling out the bracket.
4
Remove the expansion card from its protective packaging.
5
Align the card in the empty bracket. Make sure that the card is
properly seated.
AA G610.book Page 75 Monday, October 22, 2001 9:46 AM
Advertising