Acer Altos G610 - Manual (Page 126)

4 BIOS Setup utility 116
Onboard VGA Allows you to manually assign the
interrupt for the onboard VGA when the
PCI IRQ Setting parameter is set to Manual.
This parameter is grayed-out and is not
user-configurable when the PCI IRQ Setting
is set to Auto.
Onboard LAN When you set the PCI IRQ Setting
parameter to Auto, this parameter
specifies the auto-assigned interrupt for
the onboard LAN controlers installed in
your system.
When you set the PCI IRQ Setting
parameter to Manual, you need to specify
the interrupt that you want to assign for
the onboard LAN controllers installed in
your system.
User input
Onboard SCSI Allows you to manually assign the
interrupt for the onboard SCSI when the
PCI IRQ Setting parameter is set to Manual.
This parameter is grayed-out and is not
user-configurable when the PCI IRQ Setting
is set to Auto. User input
USB Host
Controller Allows you to manually assign the
interrupt for the USB host controller when
the PCI IRQ Setting parameter is set to
Manual. This parameter is grayed-out and
is not user-configurable when the PCI IRQ
Setting is set to Auto. Disabled
Enabled
PCI IRQ Sharing Setting this parameter to Yes allows you to
assign the same IRQ to two different
devices. To disable the feature, select No.
Note: If there are no IRQs available to
assign for the remaining device function, it
is recommended that you enable this
parameter.
Yes
No
Parameter Description Option
AA G610.book Page 116 Monday, October 22, 2001 9:46 AM