Removing the bpl5m hot-swap cage, System board connector cable – Acer Altos G610 User Manual
Page 72
Advertising
3 Upgrading your system
62
Note: Refer to “Mainboard layout” on page 54 for the location of
the SCSI connector.
4
Replace the housing panels.
System board connector cable
Removing the BPL5M hot-swap cage
1
Remove the housing panels. Refer to page 51 for more detailed
instructions.
2
Remove the two screws that secure the hot-swap cage to the
housing.
No.
Item
1
Connects to the mainboard
2
Blue strip with red edging
3
Connects to the hot-swap cage
AA G610.book Page 62 Monday, October 22, 2001 9:46 AM
Advertising