AAON M1-011 - Manual (Page 4)

4
WARNING
WARNING
RISK OF INJURY FROM MOVING PARTS -
Disconnect all power before servicing motor or
blower to prevent serious injury resulting from
automatic starts. Motor and blower may have
multiple power supplies.
WARNING
RISK OF INJURY FROM HOT PARTS –
Disconnect all power before servicing electric
resistance heating elements to prevent serious
injury resulting from automatic starts. Unit may
have multiple power supplies.
WARNING
RISK OF DAMAGE, INJURY, AND LOSS OF
LIFE - Improper installation, adjustment,
alteration, service or maintenance can cause
property damage, personal injury, or loss of
life. A qualified installer or service agency
must perform installation and service.
RISK OF ELECTRICAL SHOCK -
Before attempting to perform any service or
maintenance, turn the electrical power to the
unit OFF at disconnect switch(es). Unit may
have multiple power supplies.
WARNING
NOTE
These units must not be used as a “construction
heater” at any time during any phase of
construction. Very low return air temperatures,
harmful vapors, and misplacement of the filters will
damage the unit and its efficiency.
1. Description
Important Safety Information
ONLY QUALIFIED PERSONNEL SHOULD
PERFORM INSTALLATION, OPERATION, AND
MAINTENANCE OF EQUIPMENT DESCRIBED IN
THIS MANUAL.
Celebrity1
TM air handlers are designed for safe
operation when installed, operated, and maintained
within design specifications, and the instructions
set forth in this manual. It is necessary to follow
these instructions to avoid personal injury or
damage to equipment or property during equipment
installation, operation, and maintenance.
RISK OF INJURY FROM HOT PARTS –
Disconnect all power, close all isolation valves,
and allow equipment to cool before servicing
equipment with hot water and steam heating coils.
Hot water will circulate even after power is off.
Equipment may have multiple power supplies.
WARNING NOTE
IMPORTANT!
This equipment is protected by a standard limited
warranty under the condition that initial installation,
service, and maintenance is performed according
to the instructions set forth in this manual. This
manual should be read in its entirety prior to
installation, and before performing any service or
maintenance work.
Equipment described in this manual is available
with many optional accessories. If you have
questions after reading this manual in its entirety,
consult other factory documentation, or contact
your Sales Representative to obtain further
information before manipulating this equipment, or
its optional accessories.